Home » Electronic Engineering » What does BP mean in Electronic Engineering?

BP in Electronic Engineering Meaning

The BP meaning in Electronic Engineering terms is "Bypass". There are 4 related meanings of the BP Electronic Engineering abbreviation.

BP on Electronic Engineering Full Forms

  1. Bypass Passage at one side of, or around, a regular passage. Or To eliminate a station or an access unit from a ring network by allowing the data to flow in a path around it. Or A circuit that carries telephone signals from a subscriber to another point without the use of local telephone company circuits. or A secondary passage for fluid flow. or Road joining two parts of an older road to avoid a town or village.
  2. Cutoff A luminary light distribution with zero candela at an angle of 90 degrees or above and not more than 10% of emitted light above 80 degrees.
  3. Breakpoint
  4. Backplane Area of a computer or other device where various logic and control elements are interconnected. Often a printed circuit board into which other circuit boards plug at right angles.

Frequently Asked Questions (FAQ)

  1. What does BP stand for Electronic Engineering?

    BP stands for Backplane in Electronic Engineering terms.

  2. What is the shortened form of Backplane in Electronic Engineering?

    The short form of "Backplane" is BP for Electronic Engineering.

Citation

BP in Electronic Engineering. Acronym24.com. (2022, March 28). Retrieved December 28, 2024 from https://acronym24.com/bp-meaning-in-electronic-engineering/

Last updated