Home » Construction » What does SS mean in Construction?

SS in Construction Meaning

The SS meaning in Construction terms is "Stainless Steel". There are 9 related meanings of the SS Construction abbreviation.

SS on Construction Full Forms

  1. Stainless Steel Good corrosion resistance due to a high chromium content is the key characteristic. Opinions vary on the level of chromium (Cr) at which a steel becomes stainless, but it is at least 10.5%. Nickel (Ni) and molybdenum (Mo) are often present, and manganese, copper, titanium, silicon + other alloying elements may be added. The principal grades are austenitic (typically 16-26% Cr, 6-22 Ni); ferritic (10.5-28% Cr with no/low Ni); martensitic (higher carbon content than ferritic and typically 12-19% Cr with low/no Ni); and duplex, a dual-phase austenitic/ferritic steel (Cr>21%, Ni<8%).
  2. Single Strength
  3. Service Sink
  4. Structural Stage
  5. Special Structural
  6. Simplu Supported
  7. Soft Solder
  8. Set Screw
  9. Smoke Shaft

Frequently Asked Questions (FAQ)

  1. What does SS stand for Construction?

    SS stands for Special Structural in Construction terms.

  2. What is the shortened form of Single Strength in Construction?

    The short form of "Single Strength" is SS for Construction.

Citation

SS in Construction. Acronym24.com. (2022, April 21). Retrieved May 1, 2024 from https://acronym24.com/ss-meaning-in-construction/

Last updated