Home » Engineering » What does SS mean in Engineering?

SS in Engineering Meaning

The SS meaning in Engineering terms is "Stainless Steel". There are 4 related meanings of the SS Engineering abbreviation.

SS on Engineering Full Forms

  1. Stainless Steel Good corrosion resistance due to a high chromium content is the key characteristic. Opinions vary on the level of chromium (Cr) at which a steel becomes stainless, but it is at least 10.5%. Nickel (Ni) and molybdenum (Mo) are often present, and manganese, copper, titanium, silicon + other alloying elements may be added. The principal grades are austenitic (typically 16-26% Cr, 6-22 Ni); ferritic (10.5-28% Cr with no/low Ni); martensitic (higher carbon content than ferritic and typically 12-19% Cr with low/no Ni); and duplex, a dual-phase austenitic/ferritic steel (Cr>21%, Ni<8%).
  2. Service Sink
  3. Special Structural
  4. simply supported

Frequently Asked Questions (FAQ)

  1. What does SS stand for Engineering?

    SS stands for simply supported in Engineering terms.

  2. What is the shortened form of Service Sink in Engineering?

    The short form of "Service Sink" is SS for Engineering.

Citation

SS in Engineering. Acronym24.com. (2022, April 21). Retrieved April 26, 2024 from https://acronym24.com/ss-meaning-in-engineering/

Last updated