Home » Construction » What does V mean in Construction?

V in Construction Meaning

The V meaning in Construction terms is "Vinyl". There are 8 related meanings of the V Construction abbreviation.

V on Construction Full Forms

  1. Vinyl A resin with poor adhesion but good hardness, flexibility and resistance. Used for swimming pools, tank linings and marine equipment. A polymer made by linking ethylene (CH2=CH2) or substituted ethylene molecules together. A generic term for PVC, one of various compounds of ethylene that are polymerized to form resins and plastics. Vinyl resins are copolymers with vinyl chloride and vinyl acetate as the major film formers.
  2. Vacuum Pressure less than atmospheric pressure. It is usually expressed in inches of mercury (Hg) as referred to the existing atmospheric pressure. A vacuum is a space that has no pressure and no molecules inside. It is truly and empty space. Although space has a very low pressure (almost a vacuum), there are still particles out there. A volume which contains no matter. A completely empty space. The collapsing can experiment shows the effect of the pressure of gas particles.
  3. Valve A device provided in a piping system to regulate or stop the liquid low. Although many different types of valves are used to control the flow of fluids, the basic valve types can be divided into two general groups: stop valves and check valves.
  4. Vitreous A clear, jelly-like substance that fills the middle of the eye.Also called the vitreous humor, "humor" in medicine referring to a fluid (orsemifluid) substance.
  5. Virgin Plastic material that has not been gone through a melting process since polymerization. Virgin material typically has very high uniformity in the composition of the individual polymer molecules.
  6. Vertical At right angles to a horizontal plane; in a direction, or having an alignment, such that the top is directly above the bottom.
  7. Volt (measurement)
  8. Voltage A measure of electrical potential. Most homes are wired with 110 and 220 volt lines. The 110 volt power is used for lighting and most of the other circuits. The 220 volt power is usually used for the kitchen range, hot water heater and dryer. Amount of potential energy between two points on a circuit. Voltage the potential to do work, voltage is the ratio of the energy available to the charge, expressed in volts. The difference in electrical potential between any two conductors or between a conductor and ground.

Frequently Asked Questions (FAQ)

  1. What does V stand for Construction?

    V stands for Vertical in Construction terms.

  2. What is the shortened form of Voltage in Construction?

    The short form of "Voltage" is V for Construction.

Citation

V in Construction. Acronym24.com. (2021, December 16). Retrieved April 25, 2024 from https://acronym24.com/v-meaning-in-construction/

Last updated